Analog Electronics Foundations
From Ohm's law to a noise instrument you built yourself
A working foundation in analog electronics. By the end of the course you walk out with a CD40106 hex Schmitt-trigger noise instrument you built, and the vocabulary to read schematics and understand what you're hearing.
Target: Musicians, makers, artists who want a real first pass at analog electronics with something to show at the end. No prior knowledge required.
Meeting Breakdown
The Basics
- Voltage, current, resistance: what they mean physically
- Reading schematics, breadboard fluency
- LED/resistor circuits — your first working board
- Ohm's law as a tool, not a formula
Takeaway: Confidence on the breadboard and a circuit you understand.
Caps & RC
- Capacitors: what they do, how to read them
- Time constants and the RC filter
- Your first low-pass filter, with an audio signal through it
- Decoupling and why it matters
Takeaway: You can hear what a filter does to a signal.
Transistors
- NPN bipolar transistor: as switch, as amplifier
- Biasing — getting it to work, not just exist
- Your first audio amplifier stage
- Common-emitter intuition
Takeaway: A breadboard audio amp that amplifies what you plug in.
Op-amps
- The ideal op-amp model and why it's useful
- Inverting and non-inverting gain stages
- A simple mixer
- Single-supply quirks
Takeaway: You can design a gain stage to spec.
Oscillators
- What an oscillator actually is
- Square waves with feedback
- Intro to the CD40106 hex Schmitt trigger as an oscillator IC
- Tuning by changing R and C
Takeaway: Six oscillators on one chip, controlled by you.
Build & Box
- Wire up the CD40106 noise instrument: six tuned oscillators, mixing
- Pots and switches for live control
- Audio out, basic enclosure
- Group jam
Takeaway: A working noise instrument that's yours to take home.
Register Now
Reserve your spot in the next cohort — dates TBA. We'll confirm with you before the course opens.
Or fill out the form below:
יסודות אלקטרוניקה אנלוגית
מחוק אוהם עד כלי רעש שבניתם בעצמכם
יסוד עבודה אמיתי באלקטרוניקה אנלוגית. בסיום הקורס יוצאים עם כלי רעש מבוסס CD40106 שבניתם, ועם השפה לקרוא סכמות ולהבין מה שומעים.
קהל יעד: מוזיקאים, מייקרים, אמנים שרוצים מבוא אמיתי לאלקטרוניקה אנלוגית עם משהו ביד בסוף. אין צורך בידע קודם.
פירוט המפגשים
היסודות
- מתח, זרם, התנגדות: מה הם פיזית
- קריאת סכמות, רהיטות במטריצה
- מעגלי LED ונגדים — הלוח הראשון שלכם
- חוק אוהם ככלי ולא כנוסחה
תוצר: ביטחון במטריצה ומעגל שאתם מבינים.
קבלים ו-RC
- קבלים: מה הם עושים, איך קוראים אותם
- קבועי זמן ופילטר RC
- פילטר Low-Pass ראשון עם אודיו עובר דרכו
- Decoupling ולמה זה חשוב
תוצר: אתם שומעים מה פילטר עושה לאות.
טרנזיסטורים
- NPN דו-קוטבי: כמתג, כמגבר
- Biasing — להפעיל, לא רק לחבר
- שלב מגבר אודיו ראשון
- אינטואיציה של common-emitter
תוצר: מגבר אודיו על מטריצה שמגביר את מה שמכניסים.
Op-amps
- מודל ה-Op-amp האידיאלי ולמה הוא שימושי
- שלבי גיין מהפכים ולא-מהפכים
- מיקסר פשוט
- תופעות של ספק יחיד
תוצר: תוכלו לתכנן שלב גיין לפי דרישה.
אוסילטורים
- מה זה אוסילטור באמת
- גלי ריבוע עם פידבק
- מבוא ל-CD40106 כשבב אוסילטור
- כיוון בעזרת R ו-C
תוצר: שישה אוסילטורים על שבב אחד בשליטתכם.
בנייה וזיווד
- חיווט כלי הרעש מבוסס CD40106: שישה אוסילטורים מכוונים ומיקס
- פוטנציומטרים ומתגים לשליטה חיה
- יציאת אודיו, זיווד בסיסי
- ג'אם קבוצתי
תוצר: כלי רעש עובד שאתם לוקחים הביתה.
הרשמה עכשיו
שריינו מקום במחזור הבא — תאריכים יוכרזו. נחזור אליכם לפני פתיחת הקורס.
או מלאו את הטופס למטה: